Knowledge

Opportunities for the development of the mold industry

The pillar industries of the national economy such as machinery, automobiles, electronic communications, home appliances, petrochemicals, and construction all require the development of the mold indus

What are the types and characteristics of the mold?

Main mold types: 1. FRP mold (meter box, ceiling, water tank board, trash can, helmet, etc.) mold, plastic mold. 2. (PE, Kevlar helmet, vest, shield, bullet box) etc. 3. Automobile product mold: heavy

EPS exterior wall line construction plan

1. Construction tools: 1. Electric mixer; 2. Angle grinder or straight saw (requires thick enough saw thickness), ink fountain, steel bar, scraper, iron bucket, ash bucket, cable, spirit level, etc. 2

What points should be paid attention to in the production process of EPS foam...

For EPS foam molds, what points should be paid attention to in the production? It also requires multiple processing to complete, such as mold clamping and feeding, as well as steam heating for molding

What are the types of molds

What types of molds are there? A mold is a tool for forming parts. Molds are divided into plastic molds, hot work molds, and cold work molds according to the formed raw materials. Plastic molds: The w

Application of EPS material

Application of EPS material (EPS) Polystyrene foam has a closed cell structure, low water absorption, good low temperature resistance, and good thawing resistance. Therefore, it is widely used in refr

Pay attention to the EPS foam mold in the process of making

Points to note in the process of making EPS foam molds: The EPS foam mold needs to be processed many times, such as mold clamping and feeding, and steam heating. This is to ensure that there will be n

Introduction to EPS foam

EPS foam is a kind of thermoplastic material. After heating and foaming, it contains 3-6 million independent air-tight bubbles per cubic meter volume and contains more than 98% air volume. This struct

Heat treatment mold material of EPS mold

The material of the thermoforming mold of the EPS mold 1. Resin molds include resin female mold casting type, laminated resin mold, resin surface casting mold, metal coating resin or metal forming mol