EPS Block Making Machine

1. EPS block making machine is made of high-strength square tubes and thick steel plates;

2. EPS Block Making Machine uses 5mm thick aluminum steam plates with Teflon coating. And under aluminum plate, bigger sized supports at more quantity are placed to avoid aluminum plate deform under high pressure. Aluminum plates doesn't change form after ten years working;

3. Machine's all six panels are through heat treatment to release welding stress, so that panels cannot deform under high temperature;

4. EPS Block Making Machine with more steam lines to ensure steaming even in blocks, so block fusion is better;

5. Machine plates are with better drainage system so blocks are more dried and can be cut in short time;

6. All machine plates through rust removing, ball spraying, then do anti-rust base painting and surface painting, so machine body is not easy to get rusted;

7. EPS Block Making Machine use smart piping system and steaming process, ensuring good fusion of blocks both for high density and low density;

8. Fast filling system and efficient vacuum system ensures machine fast working, each block 4~8 minutes;

9. Ejection is controlled by hydraulic pump, so all ejectors push and return at same speed;

10. Most components used in the EPS Block Making Machine are imported or famous branded products.

Eps shape molding machine Make eps foam beads to become big foam board through steam heating and wind cooling.

With PLC English touch screen to realize full automatic production for feeding, heating,
wind cooling, mould opening, mould closing and ejecting the foam box and different shapes.

1.It adopts Japan Mitsubishi Corporation PLC, imported touch screen, full English display,graphical interfaces intelligent control, achieve man-machine conversation.German Tech Styrofoam Food Box Moulding Machine

2.It can carry out full automatic and semi-automatic.
3.Taiwan AIRTCA hydraulic system is stable run, low noise, high clamping force.
4.Vacuum system accelerates product shaping speed, shorts the cooling time, reduce product water content.
5.Optimized design is clear and easy with high intensity and high performance-price rate.
6.EPS Block Making Machine can carry out heating, cooling, feeding and ingot stripping process to adapt to different EPS products.
7.Perfect malfunction checkout system and motor protecting system which guarantees safe running of equipment.High quality EPS foam making machine with high strength metal alloy

1. High quality

The foam machine line main parts are imported from famous factory in the world. Such as Siemens ; Delixi ;OMRON and etc.

2. Competitive price
Our EPS Block Making Machine with competitive price because of the advance technology. So we are the best partner for you to choose !

3. Innovation
Our team developed the new solutions for different customers of different requirements.

Main feature

1. EPS Block Making Machine adopts PLC variable controller and touch screen, automatic feeding, automatic temperature control, quantitative pressure feeding, realizing fully automatic production

2. High-quality closed-type constant pressure foaming, high thermal efficiency, saving more than 50% of steam than continuous foaming machines

3. Using high-precision imported air control valve control parts, the temperature is controlled at 1%, the EPS beads reach the same level, and the moisture content is extremely low

4. The correct feeding method makes the density of the foamed beads uniform.

Production characteristics

1. Screw compression technology: Screw compression system, without any heating device, will not cause secondary environmental pollution.

2. Low energy consumption and high efficiency.

3. Speed control device to prevent melting.

4. The fish box can be transported and can be filled with water. 5. No exhaust gas, healthy and environmentally friendly.

Product Usage

EPS expanded polystyrene, EPS lunch box

application

The small EPS foam compactor is a kind of mechanical environmental protection equipment that kneads and compresses foam based on the principle of spiral rotation and pressure.

When in use, the operator only needs to put the foam into the hopper, and the equipment shreds the broken tissue, smashes the foam, squeezes the foam, and is processed by the screw mechanism to form a square foam plastic compression block.

What are the characteristics of our high-quality automatic block machine?

1. Fully automatic product with high thermal efficiency and low moisture.

2. Low noise, strong clamping force and high strength.

3. High production efficiency and high thermal conductivity.

4. High tensile strength, long service life and strong penetrating power.

5. Good adhesion, low air consumption, fast forming

What is the description of our high-quality automatic block machine?

A. EPS pre-expander

The eps raw material (expanded polystyrene) is heated by steam to become large and light foam beads. The PLC English touch screen is adopted to realize the automatic production of feeding, heating and popping bubbles.

B. EPS block making machine

Through steam heating and air cooling, the eps foam beads become a large foam board. The PLC English touch screen is adopted to realize the fully automatic production of foamed board, such as feeding, heating, air cooling, mold opening, mold closing and ejection.

C. EPS cutting machine

Cut EPS products with complex shapes into different sizes and shapes through cutting lines.

1.It adopts Japan Mitsubishi Corporation PLC, imported touch screen, full English display, graphical interfaces intelligent control, achieve man-machine conversation.

2. It can carry out full automatic, semi-automatic, middle startup and manual operation.

3. Taiwan AIRTCA hydraulic system is stable run, low noise, high clamping force.

4. Vacuum system accelerates product shaping speed, shorts the cooling time, reduce product water content.

5. Optimized design is clear and easy with high intensity and high performance-price rate.

6. This machine can carry out heating, cooling, feeding and ingot stripping process to adapt to different EPS products.

7. Perfect malfunction checkout system and motor protecting system which guarantees safe running of equipment.

1.This machine adopts PLC programmable controller and touching screen to carry out automatic production from feeding, temperature control, ration, pressurizing and feeding.
2.Top-grade sealing foaming with constant pressure, high thermal efficiency, save 50% steam or above than continuous foaming machine
3.Adopt high-precision imported pneumatic control valve so that temperature can be controlled at ±1%, EPS grains are at same level with low water content.
4.Correct feeding method can assure even density.

Hot Tags: eps block making machine, China eps block making machine suppliers, manufacturers, factory, EPS Air Cooling Block Machine, EPS Foam Block Making Machine, EPS Vacuum Block Machine, EPS Foam Block Machine, EPS Mould, EPS Sandwich Board Roll Forming Machines Vacuum Block Machine