How To Use The EPS Shape Moulding Machine?

The EPS molding machine produces parts with customized design specifications, such as the packaging of electronic products after the block molding machine produces large EPS. EPS is a rigid porous plastic with many shapes and applications. Most commonly used in fish boxes, consumer goods packaging and building insulation boards. So how to use the EPS molding machine? Let me introduce this to you below.

What is an EPS molding machine?

The EPS molding machine produces parts with customized design specifications, such as electronic product packaging, and then the block molding machine produces large pieces of EPS, which can be cut into shapes or sheets for packaging and

Construction applications. The main supporters of EPS molding machines are Process Control Bachmann, PLC

Pneumatic control Festo, hydraulic drive Parker, electrical components Schneider, process control Vvalve Gemü, electric servo drive Schneider and gearbox Keb. Reliable EPS molding machines are usually equipped with quick die change systems, steam and proportional control. Pneumatic, unloading and stacking robots, surface treatment of molded parts, and even electric drives with bent rods. Install all the above components to achieve gentle and fast movement, optional electric drive for faster movement, and proportionally driven steam and air control. It also aims to save energy and shorten cycle time.

How to operate the EPs molding machine?

So, if you have a good EPS molding machine, how would you operate it? The problem is not difficult, because most of these machines are automatic, you only need to pay attention to the control panel. The operator correctly inputs the special mold to be produced through the panel, and sets its quantity and detailed indicators

Production.

What are the precautions for the use of EPS molding machine?

No matter how good your machine is, there are some precautions you need to keep in mind in case an emergency occurs. Therefore, the first one is: before starting the machine every day, be sure to check whether the travel switch that controls the opening and closing of the mold is working properly. The second is: always remember to check the power supply to ensure that the voltage cannot exceed 10% of the rated value and cannot be lower than 85% of the rated value. The third is: when repairing the machine, the power and air supply must be turned off, and signs such as "repair work prohibited by others" must be hung. The fourth is: When the machine is working, the safety door must be closed. Do not manually bind the limit switch used to detect the position of the safety door. The fifth item is: always check the air pressure, water pressure, steam pressure and oil pressure during work. The sixth item is: Regularly check whether the lubricating oil in the lubricator is sufficient, and remove the moisture in the oil-water separator to avoid damage to the pneumatic components.

If you are looking for a reliable EPS molding machine to buy, please be sure to buy from our company, those exquisite and high-quality machines can definitely satisfy your unique taste.

In addition, we also provide various types of EPS machines, such as pre-expanders, block forming machines, cutting machines and recycling systems.